Dry Ridge Roofing in Bristol
- Clear, no obligation quotes
- Local, directly employed teams
- Work left tidy
Get a Free Quote
Send a few details and we'll be in touch shortly.
Mechanically fixed ridge and hip systems for Bristol properties
The ridge is the line along the top of your roof, and on most older properties the ridge tiles are bedded on sand and cement mortar. Mortar is not a permanent fixing. It shrinks, cracks and lets go, usually after fifteen to thirty years of frost and heat.
A dry ridge system replaces that mortar with mechanical fixings. Each ridge tile is screwed to a batten through a sealing unit, so the tile is held by a fixing rather than by adhesion. Bristol covers a wide spread of building ages, from Georgian and Victorian terraces in Clifton, Redland and Totterdown through to interwar semis and modern estates further out. Roof coverings vary just as much, so the right answer on one street is often wrong two roads away.
Why mortar ridges fail, and what changes
Mortar bedding fails in a predictable way. Water gets into hairline cracks, freezes and expands, and the crack widens. Thermal movement works the tile against the bed. Eventually the bond breaks and the tile is sitting on the roof rather than fixed to it.
The consequences are worth taking seriously. A loose ridge tile at roof height is a genuine safety risk, particularly on a property fronting a pavement or parking area. Beyond that, open joints let water into the roof space directly at the highest point.
A dry ridge system changes the failure mode:
- Ridge tiles are mechanically fixed, so they do not rely on a mortar bond that degrades
- A ventilated ridge roll lets the roof space breathe at the apex, which helps control condensation
- The system flexes with thermal movement instead of cracking
- Repointing is no longer part of your maintenance cycle
- Most manufacturers offer long guarantees on the components, commonly ten years or more
Recent dry ridge roofing work
A few recent dry ridge roofing jobs. Photographs are of work carried out by TB Rooflines, not stock images.
What Our Customers Say
Read genuine reviews from homeowners and businesses across Bristol and the surrounding area.
Reviews are loaded from Trustindex. See our privacy policy.
BS 5534 and what a conversion involves
Since the 2014 revision of BS 5534, the British Standard for slating and tiling, mortar alone is no longer accepted as the sole fixing for ridge and hip tiles on new and re roofed work. Ridges must be mechanically fixed. This is why dry ridge is now standard practice rather than an upgrade.
It is worth being precise about what that does and does not mean. The standard applies to new work and re roofing. It does not compel you to convert a sound existing mortar ridge that is not causing problems. But once that ridge needs attention, mechanical fixing is the route that meets current standards, and repointing is a short term fix at best.
A conversion on a typical house runs like this:
- Existing ridge tiles are lifted and the old mortar bed cleaned off
- Sound tiles are set aside for reuse where they are in good condition, which keeps the appearance consistent and the cost down
- A ridge batten is fixed along the apex to the correct height
- Ventilated ridge roll is laid and dressed down over the top courses each side
- Ridge tiles are screwed down through unions, with the correct fixings for the tile type
- Hips are treated the same way, with a hip iron at the foot
Ridge tiles that are cracked or spalled cannot be reused safely, and replacements on older or unusual profiles are not always an exact match. Where that applies it gets raised at survey rather than discovered halfway through.
Why choose TB Rooflines for dry ridge roofing in Bristol?
A ridge conversion is a job where the detail decides how long it lasts. What TB Rooflines does on Bristol properties:
- Fixed to current BS 5534 practice, mechanically rather than bedded in mortar alone
- Existing ridge tiles cleaned and reused where sound, which keeps the roof looking right
- Ventilated ridge roll fitted, so the conversion helps the loft rather than just the ridge
- Correct fixings for the tile type, not a one size fits all kit
- One point of contact from quote to completion, with no subcontracted middlemen
- Site cleared at the end of each working day, not just at the end of the job
Where a short run of sound mortar would genuinely do, you will hear that too, along with a straight view on how long it is likely to last.
Dry Ridge Roofing in Bristol: common questions
How long does a dry ridge conversion take?
Can you reuse my existing ridge tiles?
Is repointing the ridge ever the right answer instead?
Will I notice a difference in the loft?
What happens if it rains partway through?
Other services in Bristol
- Roof Repairs in Bristol
- New Roofs in Bristol
- Roofers in Bristol
- Fascias & Soffits in Bristol
- Guttering in Bristol
- Rendering & Exterior Painting in Bristol
- Damp Proofing in Bristol
- Moss Removal in Bristol
- Commercial Roofing in Bristol
- Leadwork in Bristol
- Tiled Roofing in Bristol
- Slate Roofing in Bristol
- Flat Roofing in Bristol
Dry Ridge Roofing in other areas we cover
Dry Ridge Roofing across Bristol and the surrounding area
TB Rooflines covers Bristol and the towns around it, working from a base in Gloucester. If you are just outside the area shown, it is still worth a call.
Unit 2, Woodrow Way, Gloucester, Gloucestershire GL2 5DX
Get a quote for dry ridge roofing in Bristol
Tell TB Rooflines what you are dealing with and you will get a straight answer on what the work involves, what it will cost and how long it will take. No obligation.